How Much Does a Wood Privacy Fence Cost in DFW? (2026 Prices)
What a new wood privacy fence costs in 2026, what drives the price, and what DFW homeowners should budget for beyond the boards.
Written by the Harbinger Fence, Deck & Pergola team. Reviewed by Brandon Jackson, owner. Updated October 30, 2026.
Quick answer
- National cost guides put the average for a privacy fence at $4,300, with most projects between $1,800 and $8,000, or about $10 to $50 per linear foot.
- A cedar fence averages $6,500 for 200 linear feet.
- Budget extra for old fence removal, gates and stain.
- These are typical national ranges, not Harbinger quotes. Call (214) 617-1831 for an on-site quote.
Privacy Fence Cost by Length
Length is the biggest driver. The national per-foot range gives these totals:
- 50 ft: $500 to $2,500
- 100 ft: $1,000 to $5,000
- 150 ft: $1,500 to $7,500
- 200 ft: $2,000 to $10,000
- 250 ft: $2,500 to $12,500
- 300 ft: $3,000 to $15,000
The spread is wide because it covers all privacy materials. Wood sits toward the lower half. For a Texas reference point, cost guides list Houston privacy fences at $1,500 to $3,750.
Cost by Type of Wood
- Wood fence, all types: average $3,312, most pay $1,919 to $4,948, or $10 to $30 per linear foot
- Cedar fence, 200 ft: average $6,500, most pay $3,700 to $9,300
- Wood privacy fence by material: average about $2,700
Cedar costs more up front than pine, but it is the most common choice for DFW privacy fences because it resists rot and bugs better.
Cost Factors: What Changes the Price
Height
A 6 ft fence is the standard. An 8 ft fence needs longer boards and posts, and more labor. Check your city and HOA height rules first.
Style
Side by side boards use less wood. Board on board overlaps boards for full privacy and uses more. A top cap and trim add a finished look and cost.
Posts
Wood posts are the classic choice. Steel posts are a common upgrade in North Texas. Ask any contractor what post type and depth they use.
Labor
Labor is about 50% of a fence project.
Ground and access
Slopes, trees, roots and tight side yards add time.
Extra Costs to Budget For
Typical national ranges:
- Old fence removal: $3 to $5 per linear foot, or about $300 to $750 total
- Gates: $150 to $2,000
- Post caps: $30 to $150 per cap
- Permit: $20 to $60 nationally (check your city)
- Painting or staining: $3.50 to $13 per linear foot for a pro job
Harbinger staining price: about $6 to $8 per linear foot, both sides, with a $598 offer for up to 100 feet. See the fence staining cost guide.
DFW Notes
- Permits. Frisco requires a permit for new and replacement fences (City of Frisco FAQ). McKinney and Plano have their own rules, so check with your city before you build.
- HOAs. Many Frisco, McKinney and Plano neighborhoods set fence height, style and stain color. Get HOA approval in writing.
- Sun. Texas sun grays bare cedar fast. Plan to stain a new fence and keep it on a schedule. See how often to stain a fence in Texas.
- Wind. Spring storms test posts. Post depth and type matter more here than the boards.
- Call 811. Utility lines must be marked before anyone digs post holes.
DIY vs. Hiring a Pro
DIY: you can save on labor, which is a big share of the cost. You will need a post hole digger or auger, concrete, a string line and a level, plus a few weekends.
Hire a pro: if you want straight lines, posts set in concrete at the right depth, and the job done in days. A pro team usually puts in 100 to 200 feet of wood fence in one to three days.
Planning a new fence? Call (214) 617-1831 or schedule a visit for an on-site quote in Frisco, McKinney or Plano.
Ways to Save
- Reuse sound posts if the new fence follows the same line.
- Choose side by side boards instead of board on board.
- Build in the off season when crews are less busy.
- Stain the fence early so it lasts longer.
FAQ
How much does a 6 ft cedar privacy fence cost? Cost guides list cedar at an average of $6,500 for 200 linear feet, with most paying $3,700 to $9,300. Height, style and posts move the price.
How much is a privacy fence per foot? About $10 to $50 per linear foot across materials. Wood alone runs about $10 to $30 per foot.
Do I need a permit for a fence in Frisco? Yes for new and replacement fences (City of Frisco FAQ).
Should I stain a new cedar fence? Yes. Stain protects against sun and water. Harbinger stains fences for about $6 to $8 per linear foot, both sides.
How do I pay Harbinger? We take cash, check, card and Zelle.
Get an On-Site Quote
Harbinger Fence, Deck & Pergola builds and stains fences in Frisco, McKinney and Plano. We will measure, walk the line with you and give you a clear quote.
Call (214) 617-1831 or schedule a visit.
Prices are typical national ranges from published cost guides, checked October 30, 2026, not Harbinger quotes. Permit rules from the City of Frisco.
About the Author
Harbinger Team
DFW Fence & Outdoor ExpertsThe Harbinger team has been building fences, decks, and pergolas across the Dallas-Fort Worth metroplex for years. Our guides are written from real on-the-ground experience — we've seen every soil condition, HOA rule, and material failure that DFW throws at a fence contractor. When we write about what works, it's because we've built it with our own crews.
Related Articles
Ready to get started?
Get a free, no-obligation estimate from Harbinger — DFW's trusted fence, deck & pergola contractor.
Get DFW Construction Tips in Your Inbox
Fence maintenance advice, deck design trends, and pergola ideas — delivered straight to you. No spam, unsubscribe anytime.
Join homeowners across DFW getting smarter about their outdoor projects.