FENCE STAINING
Protect faded, dry, and weathered fences with professional-grade stain and clean application.
GET STAINING PRICINGMost fences don't fail.
They're just neglected.
Wood doesn't fall apart overnight. It degrades slowly through sun, moisture, and neglect — until the damage is structural and staining can't fix it anymore. The window to protect it is now, not after it starts rotting.
Staining done wrong wastes money.
Done right, it extends the life of the fence by 5–10 years and costs a fraction of replacement.
Two staining options.
Both done right.
We assess your fence and recommend what it actually needs — not the most expensive option.
Lower CostMaintenance Coat
For fences that were previously stained and are still structurally sound. Light cleaning, condition check, and a fresh coat applied over the existing finish.
- For previously stained fences in good condition
- Light cleaning and surface prep
- Fresh stain coat applied over existing finish
- Extends lifespan 3–5 more years
- Fastest turnaround option
- Most cost-effective service
Most PopularFull Restoration
For grey, weathered, or previously failed fences. Full strip, deep clean, prep, and new stain application from bare wood. Brings the fence back from dead. Prep work varies a lot, so we price this on site.
- For grey, weathered, or failed fences
- Full strip and deep cleaning of wood surface
- Mildew treatment and brightening as needed
- Complete stain application from bare wood
- Most dramatic visual transformation
- Best long-term protection result
Oil-Based vs. Water-Based.
We recommend based on condition.
Oil-Based Stain
Recommended- Penetrates deep into wood fibers
- Superior UV and moisture protection
- Richer, longer-lasting color
- Preferred for cedar and older wood
- Lasts 3–5 years in Texas conditions
This is what we use for most DFW builds.
Water-Based Stain
Maintenance Option- Faster drying — ready in 2–4 hours
- Lower VOC formulation
- Easier recoat and cleanup
- Works well for maintenance coats
- Available in wide color range
Good for maintenance situations and shaded fences.
Not sure which is right for your fence?
We inspect and recommend the correct product before touching anything.
How much does fence staining
cost in Dallas?
Most fences cost $6–$8 per linear foot to stain, both sides. Here's what that looks like for common fence lengths.
Both sides, standard 6-ft fence
Both sides, typical backyard
Both sides, standard residential lot
Both sides, longer fence run
Grey, peeling, or failed finish that needs extra prep
Fence + deck stained together
What Affects the Final Price
Real results.
Real fences in DFW.
Cedar — Plano, TX
Maintenance Coat
Board-on-Board — Frisco, TX
Full Strip + Restain
Dog-Ear Cedar — McKinney, TX
Oil-Based Application
Privacy Fence — Allen, TX
Redwood Color Finish
Cedar — Dallas, TX
Chestnut Brown Finish
Combo — Richardson, TX
Deck + Fence Stain
Why most stain jobs look bad
in 6 months.
These aren't edge cases. They're the most common reasons fence staining fails — and what we build our entire process to prevent.
No Surface Prep
Staining over dirt, mildew, or peeling old product. The stain can't bond — it peels and blotches within months.
Cheap Consumer Products
Box-store stains aren't formulated for Texas UV intensity. They fade fast and leave the wood unprotected.
Uneven Application
Rushed jobs with inconsistent coverage leave light spots, streaks, and uneven color across the whole fence.
Over-Spraying
Spraying too heavy causes pooling, drips, and film buildup. Wood can't absorb what it can't drink.
No Absorption Control
Old and new wood absorb stain differently. Without adjustment, you get a two-tone fence that looks worse than before.
Wrong Weather Timing
Staining in direct sun or high humidity causes fast drying and poor penetration. Timing and conditions matter.
We stain it correctly — not quickly.
No guesswork.
No patch jobs.
Inspect Fence Condition
We assess before we touch anything.
We walk the entire fence line, check board condition, post stability, and determine whether maintenance or full restoration is right.
Prep the Surface
No shortcuts on prep.
Power washing, mildew treatment, sanding rough spots, brightening grey wood. Prep is what separates a 6-month job from a 5-year job.
Apply Even Coat
Controlled, professional application.
We apply with proper technique — even coverage, controlled absorption, consistent color throughout. No rushing, no skip areas.
Final Check
We don't leave until it's right.
Final walkthrough for consistency, touch-ups on corners and hard spots. You get the result you paid for.
Why homeowners stain now
instead of waiting.
Prevent Fence Replacement
A $600–$1,600 staining job (about 100–200 ft, both sides) can add 5–10 years to a fence that would otherwise need full replacement at $5,000–$15,000.
HOA Compliance
Many DFW HOAs require fences to be stained and maintained. We're familiar with common requirements across the metroplex.
Improve Curb Appeal
A freshly stained cedar fence immediately upgrades the look of any property — color, consistency, and depth make a real difference.
Protect Your Investment
You already paid for the fence. Staining is the lowest-cost, highest-return maintenance service you can do.
What homeowners say
after we're done.
"Amazing company. Very highly recommend recommended."
Get a Pricing Estimate
Before You Call.
Adjust your fence details and see a live estimate update in real time.
Our recommended option for DFW — penetrates deep, lasts 3–5 years.
Auto-set based on condition — you can adjust.
Estimate only. Final price based on on-site inspection.
Stop letting your fence
break down.
Get clear pricing and a real plan. Not a vague estimate. Not a ballpark. A specific number for your actual fence.
Request Your Quote
No obligation. Just a real price.